Products >> IBM (Injection Blow Molding) >> Injection Blow Tooling

Back

Preform Mold Components:

Die set 1050 Steel, electroless nickeled
Injection Manifold 1050 Steel.
Preform Cavities Stavax Stainless Steel, hardened to 38-42 Rockwell C scale. Polished to a mirror finish.
Neck Molds Stavax Stainless Steel, hardened to 52-54 Rockwell C scale.
Core Rods Stavax Stainless Steel, hardened to 52-54 Rockwell C scale. Polished to a mirror finish.
Face Bars 5061 Aluminum for light weight.

Blow Mold Components:

Die set 1050 Steel, electroless nickeled
Blow Cavities Machined from 7075 T6 Aircraft Grade Aluminum.
Neck Molds Stavax Stainless Steel, hardened to 52-54 Rockwell C Scale.
Bottom Plugs AMPCO 18 bearings, bearings ,Beryllium copper Base. Stainless Steel springs,
Stavax Stainless. Steel Cams hardened
to a 38-42 Rockwell C scale.

Pick-Off Assembly:

Stripper Bar 6061 Aluminum
Stripper Plate 6061 Aluminum

MOLD DESIGN INFORMATION:

  • Molds are individual mold blocks for easy replacement or repair.
  • Blow mold push up may be water cooled and is at the discretion of the mold designer.
  • Standard spare parts include one injection core rod, end one perform neck mold.
  • Tip blow verses shoulder blow is at the discretion of the mold designer

Core Rods fitted to face bar Stainless Steel Core Rods
Polished to mirror finish		 6061 Aluminum light weight Face Bar
Unit Cavity design with bottom push-up insert
(Large advantage over monoblock design)		 Injection Manifold of 1050 steel and pre-form
cavities 38-42 Rockwell polished stainless steel 		Entire Die Set 1050 steel Electroless nickel Plated

EXAMPLE OF OUR LATEST IBM TOOL DESIGN

Injection Blow Molds

Packing and Transport Finish of the Injection Mold Mold Guide
Injection Mold and Manifold Injection Mold Injection and Blow Cavities
Blow Cavities Blow Mold Blow Mold in Machine
Packing System for Core Rods Mold and Transport Method